Your Parts:

Your Urban Worm Bag should come with:

  • 12 identical male frame tubes
  • 8 shorter female frame tubes
    • When joined with the male tubes, these make up the horizontal supports
  • 4 longer female frame tubes
    • When joined with the male tubes, these make up the vertical supports
  • 8 corner connectors

Assembly:

  • Connect the all female tubes to a male tube. You will now have 8 horizontal supports and 4 vertical supports
  • Insert a horizontal support into each of the fabric tunnels on the Urban Worm Bag.
    • Connect the horizontal supports with corner connectors with the branding on the connector facing up
    • This completes your top assembly
  • Connect the remaining 4 horizontal supports with corner connectors with the branding facing down.
    • This is your bottom assembly.
  • Insert the vertical supports into the remaining insertion points on the bottom assembly connectors
  • Take the top assembly and press it down upon the vertical connectors
    • Do not glue or use a hammer or mallet.
  • Your assembly is complete.

I hope this helps! Thank you for your patience!