At each end of the CFT are extensions for the motor drive or hand winch. These are about 18” each.


For access to the motor controls or the hand winches, we recommend a minimum of 5 ft clearance at each end.


If the main work area is along side the CFT, then 8 ft is ideal, allowing for use of long-handled tools. But smaller spaces can still work well by adapting your process to fit the space available.


The back side needs just a minimum of clearance for occasional access.

To purchase, please visit: https://shop.urbanwormcompany.com/collections/all/products/michigan-soilworks-cft